300Mbps Wireless-N Repeater/AP

  • Wireless-N speed up to 300Mbps
  • Complies with IEEE 802.11B/G/N standards.
  • Supports Repeater, Client and AP mode.
  • Supports WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions.




Plug Type EU, UK, US 
Standards IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 
Interface 1 * 10/100Mbps LAN/WAN Port 
Button WPS Button, Reset Button 
Antenna 2 * Internal external 
Dimensions ( W x D x H ) 53 x 53 x 83mm


Frequency 2.4~2.4835GHz 
Signal Rate Up to 300Mbps (dynamic) 
Reception Sensitivity 270M: -69dBm@10% PER 
Transmit Power < 20 dBm (EIRP) 
Wireless Modes Repeater/AP 
Wireless Security 64/128/152-bit WEPWPA-PSK / WPA2-PSK


Package Contents1xWireless-N Repeater/AP1xRJ-45 Ethernet Cable1xQuick Installation Guide 
EnvironmentOperating Temperature: 0°C~40°C (32°F~104°F)Storage Temperature: -40°C~70°C (-40°F~158°F)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~90% non-condensing

WiFi Repeater’s Feature

  1. Exclusive high quality wall-to-wall technology ensures that the repeater coverage is not blocked.
  2. New high-quality chip that provides stable 2.4GHz network service with network speeds up to 300Mbps.
  3. Built-in software upgraded, super simple setup steps, eliminate the cumbersome troubles for consumers.


In order to protect the life of the repeater, reduce the loss of product use. Please do not use the repeater for a long time(more than 24 hours ). When you do not need to use it, please take it out from the power supply.


A1. Please check whether you enter the same password as your router, and check is there any special characters in it, such as ~!@#$%^&*(). If yes, please change your router password. Repeater can not identify special characters. 

A2. Please long press the reset button for 10 seconds under powered. ( NOT WPS button, the reset button is at the side)